How to Swap Faces in Photoshop in Just 10 Easy Steps

How to remove the background of an image in Photoshop using 2 different methods

It's easy to remove the background of a photo in Adobe Photoshop in a few ways.

With the most recent version of Photoshop, the Quick Selection Tool streamlines the process for you, making separating your subject from the background simple.

Visit Business Insider's homepage for more stories.

Do you ever wonder what your fluffy Akita might look like in its natural wintry habitat? Or perhaps, what your cuddly black cat might look like in an unnatural, hostile habitat, like the endzone of an NFL stadium?

While we didn't need Photoshop to envision the latter this football season, in general, Photoshop is your go-to tool to make what's usually only imaginable a reality, or as real as a picture, at least.

Removing a background in Photoshop paves the way for some of the most fun uses of the application.

And while there are more complex, time-consuming ways to rid your subject of its boring background, there's an easy method you can go about with the Quick Selection Tool in Adobe Photoshop CC 2020.

Check out the products mentioned in this article:

How to remove a background in Photoshop

1. Start the Photoshop app on your Mac or PC. Pull up the image you'd like to remove the background from by clicking "File," and then "Open…" from the top menu.

2. Next, it's time to wield the Quick Selection Tool. The icon, a solid rectangle surrounded by a dotted line, is found on the left side toolbar by right-clicking the Object Selection Tool and clicking the third icon.

The Quick Selection tool isn't the only way to go about isolating subjects in Photoshop, but it is definitely one of the easier ways. Emma Witman/Business Insider

3. Click piece by piece until you have surrounded the image that you want to remain in the foreground, or the part of the image that will remain after the background has been removed. You can also tap "Select Subject" in the upper "Options" menu bar.

I'm foregoing the "Select Subject" button for the purposes of practice, but in all honesty, it's a very good if not equally effective way to lasso the desired subject matter. Emma Witman/Business Insider

4. Zoom in to fix any imperfections around your subject. You can also do this in "Quick Mask" mode.

5. When you're happy with the image that you want to isolate from the background, right click your outlined subject and click "Layer Via Copy."

Right click and select "Layer Via Copy" from the menu. Emma Witman/Business Insider

6. Tap the eyeball icon in the "Layers" panel next to "Layer 0," as it will be called by default to make the background disappear, in the menu on the right side of your screen.

Alternatively, here's an easier way to remove the background, if you don't need near-perfect margins on your subject

1. Open your image.

2. Create a new layer in the right side "Layers" panel. Deselect "Layer 1," and select the "Background" layer, with your photo as the icon image, under "Layers."

Create a new layer. Emma Witman/Business Insider

3. With that layer selected, you will now see the option "Remove Background" under the "Quick Actions" panel. Click it.

4. You may need to tap the double arrows to "Expand Panels" in order to see "Quick Actions" if you're on a smaller screen.

My dog subject Roo here is now free to roam Mars, Yankee Stadium, or any other background in the Public Domain that I can slap behind her without infringing on copyright laws. Emma Witman/Business Insider

Related coverage from How To Do Everything: Tech:

How to Change the Background Color in Photoshop + Simpler Alternatives

As a photographer, one of the most basic but important tasks is color correction. If you’re not familiar with Photoshop, it’s a popular image editing program that allows users to manipulate images in all sorts of ways.

One of these ways is changing the background color—which can be useful for everything from making your images look more professional to creating custom color schemes for your website or social media profiles.

Photoshop is a powerful tool, but it’s not easy to learn. Learning Photoshop requires patience and persistence. It can take a long time to master the software. For a simple task like changing the background color, it’s best to start with a less complex editor.

In this article, we will cover ways to change the background color using the complex tool Photoshop and a more simple and beginner-friendly tool, Colorcinch.

2 Easy Ways to Change the Background Color Using Colorcinch

We all want to get our jobs completed the easiest way possible. Like a simple background color change. However, Photoshop will be hard to navigate if you are a beginner.

Now we will cover two easy ways to change the background color in Colorcinch. Let’s jump right into it.

1. By Using the Background Remover

Step 1: Start by opening Colorcinch and Upload your image.

Step 2: Go to Edit and click on Background Remover AI.

Step 3: Click on Remove Background. The AI will automatically remove the background. Once the background has been removed, click on Background Color and pick any color of your choice.

It’s that easy! Let us see the final result:

2. By Using Replace Color Tool Step 1: Open Colorcinch and Upload your image. Step 2: Navigate to Edit — Replace Color. Step 3: On the Replace Color panel, start adjusting the From Color Picker and the To Color Picker to your desired color. What it will do is it will automatically change the whole picture’s color. Step 4: We will have to separate the subject from the background because it is the same color as the background. To do this, click on the Erase Tab. Adjust the Brush Settings and brush over your subject to erase the color. Let’s take a look at the result:

Changing the Background Color in Photoshop Photoshop is the go-to editor for many graphic artists. However, it is a bit complicated for beginners. Nevertheless, here’s a step-by-step guide on how to change the background color. Step 1: Open an image in Photoshop. Step 2: Separate the subject from the background. To do this, use the Quick Selection tool and drag your cursor all over it. A moving dashed line, known as the “marching ants,” will automatically indicate the tool’s marks. Have patience in doing this step as it can be time-consuming to cover some areas accurately. Step 3: Click on the New Adjustment Layer icon in the Layers panel and choose Solid Color. Step 4: When the Color Picker window appears, choose any color you want because you can always change it later. Then press OK. Here’s the before and after:

Conclusion

Changing the background color is a common task that a graphic designer does. Photoshop could be the obvious choice for professionals. However, it could be daunting to use for beginners.

In this article, we learned that a simple task like this can be done easily even without using Photoshop; thanks to the two easy methods to change the background color in Colorcinch.

If you find the article helpful, feel free to leave a comment!

How to Swap Faces in Photoshop in Just 10 Easy Steps

The Photoshop face swap is an image-editing technique that allows you to take the face of one person and put it onto another person’s body using Photoshop. The Photoshop face swap technique is especially useful for ecommerce brands that want to make the most of their product photography investments.

There are many reasons you’d want to change a face in Photoshop, including:

Adding variety to the models featured in your product photos (remember, consumers like to see people who look like them)

Using a shot where everything but the model’s face was in the right position

Making an unhappy or angry child happy again

In this article, we’ll learn how to face swap and blend in Photoshop in just 10 easy steps.

Watch the video here or scroll down below for the written tutorial.

Step 1: Open image files in Photoshop

Before you can begin the face swap Photoshop technique, you’ll need to select the photos you want to work with. For best results, choose two photos where the models are looking in the same direction. Also, pay attention to the location of shadows on both models’ faces. The easiest photos to work with will have minimal shadows and soft lighting.

We'll use the following two images in this tutorial:

Open both images in Photoshop by clicking CTRL+O (COMMAND+O on Mac) or selecting File > Open from the dropdown menu at the top of the application window.

Since we’re learning how to photoshop someone's face onto another body, we’ll refer to the photo with the yellow background—the first model—as “Body” and the photo with the blue background—the second model—as “Face.”

Step 2: Select the second model’s face

We’ll begin working with the Face photo. In the Face photo, ensure you are on the layer containing the model’s face. If you are working in a JPG, the file is flattened and you will be on the correct layer by default. However, if your file is a layered Photoshop file, you need to select the correct layer in the Layers panel.

Once in the correct layer, choose the Lasso tool from the Toolbar on the left side of the application window.

If you don't see the Lasso Tool in the Toolbar, it may be hiding behind the Polygonal Lasso Tool or the Magnetic Lasso Tool. Click and hold on either of these tools if you see them to reveal the Lasso Tool.

A Beginner’s Guide to Photoshop Tools Learn more

Draw a rough outline around all the important features of the model’s face that you want to swap onto the other face. This may be just the eyes, nose, and mouth, but also consider cheekbones, eyebrows, and any distinguishing features such as moles. Do not select any of the model’s hair.

Step 3: Copy and paste the second model’s face

You should now see a dashed marquee line (known fondly as marching ants) around your selection. Choose CTRL+C (COMMAND+C on Mac) to copy the selection of the face. Alternatively, you can choose Edit > Copy from the dropdown menu at the top of the application window.

Next, we’ll move into the Body photo. In the Body photo, paste the selection you made from the other photo by typing CTRL+V (COMMAND+V on Mac) or choosing Edit > Paste from the dropdown menu.

Don’t worry about it looking bad right now. We’ll be learning how to blend faces in Photoshop in just a minute.

Using the Move Tool in your Toolbar, move the new face so that it is roughly in the same place as the face you’ll swap faces with in Photoshop.

Step 4: Resize the face

Make sure your Layers panel is visible. If you don't see it, you can bring it to the forefront of your screen by selecting Window > Layers from the dropdown menu.

In the Layers panel, make sure the new layer with the face from the Face image is selected. Rename this layer to “Face” by double-clicking on the name of the layer until it becomes available to edit.

Next, reduce the opacity of this layer to 50%. You can now see the features of both faces to swap in Photoshop.

In the dropdown menu at the top of the screen, select Edit > Transform > Scale.

You’ll see a box around the face. Place your cursor at one of the corners of the box, hold down the SHIFT key, and drag the corner until the new face is the same size as the face underneath. Since you are working in reduced opacity, you should be able to line up the eyes, nose, and mouth as you resize the face.

Hit ENTER (RETURN on Mac) when you're satisfied with the resizing.

If you need to rotate the face, select Edit > Transform > Rotate from the dropdown menu and rotate the face until it lines up correctly.

No two faces will line up exactly, so you'll need to use your own judgment here as to what size and rotation works best.

Again, remember to hit ENTER (RETURN on Mac) when you're done so Photoshop knows to make the rotation permanent.

Reset the opacity of your Face layer to 100%.

Step 5: Duplicate your Background Layer

The Photoshop face swap technique is a destructive process, so we need to duplicate our background layer before we go any further just so we can retain our original image for touch-ups.

To duplicate the background layer, select the layer containing the first model’s body (if you originally started with a JPEG or flattened layer, this will be a locked layer called Background).

Look for the small block of four horizontal lines at the upper left corner of the Layers panel. This is your Layers panel menu. Click on those lines to pull down the Layers panel options.

From the dropdown, select Duplicate Layer….

Alternatively, you can type CTRL+J (COMMAND+J on Mac) to duplicate the layer without needing to access the Layers menu.

In the pop-up window, name the new layer “Body.”

Back in the Layers panel, click on the button that looks like an eye just to the left of the Background layer. This will toggle the layer’s visibility off.

Step 6: Make a selection in the Body layer

In the Layers panel, select the Face layer. Then, from the dropdown menu at the top of the screen, choose Select > Load Selection.

A pop-up window will appear. In it, the channel should say “Face transparency.” Underneath Channel, make sure the box next to Invert is unchecked.

The radio button next to “New Selection” should be selected.

Click OK.

Back in the Layers panel, click on the eye icon next to the Face layer to make the new face invisible. DO NOT deselect your selection, though. We’ll be using that selection in the next step.

Step 7: Create a slight overlap of the face with the body

Next, select the Body layer in the Layers panel.

From the dropdown menu, choose Select > Modify > Contract.

In the pop-up menu that appears, set the contract amount to 10 pixels. Click OK.

Step 8: Delete the face from the body layer

With the Body layer still selected, press BACKSPACE (DELETE on Mac) to remove the area beneath the face.

Press CTRL+D (COMMAND+D on Mac) to deselect.

Your image should look something like this. Horrifying, yes. But we’ll be fixing it in just a moment.

Step 9: Blend everything together

Click on the eye icon next to the Face layer to toggle visibility on. You should see both the face and the body again.

Still in your Layers panel, select the Face and Body layers at the same time by holding down the SHIFT key.

Go to the dropdown menu at the top of the screen and choose Edit > Auto-Blend Layers….

In the pop-up window that appears, Select Panorama and check the box for Seamless Tones and Colors and Content Aware Fill Transparent Areas.

Click OK.

You'll now have a new, merged layer with the two faces merged together.

Step 10: Perform touch-ups (if necessary)

You may be done at this point! But for this example, the original model’s hair is covered up in places by the new model’s face.

To fix this and similar issues, toggle the visibility of the original layer back on by selecting the eye icon next to the Background layer.

Then, toggle off the visibility of any layers existing between the new merged layer and the original background layer.

In your new, merged layer, select the Eraser tool.

Carefully erase any areas of the new model’s face to reveal the original layer beneath. Work carefully, and use a small brush with 0% hardness for best results.

Once you're satisfied with the results, remember to save your image.

Congratulations! You now know how to Photoshop a face onto another body, and you're ready to use this image to enhance your ecommerce photos.

Let our pro designers look after your most tedious image edits, from 25¢ per image Learn more

FAQs about Photoshop face swap

How do you Photoshop a face onto another body for free?

You can't really Photoshop a face onto another body for free because Adobe charges a fee to use its photo-editing software. If you outsource the Photoshop face swap, you'll also have to pay for the services.

Can you swap heads in Photoshop?

Yes, you can swap heads in Photoshop. You can use the steps in this tutorial to swap faces and apply the same techniques to the whole head.

How do you put a face on another body without Photoshop?

Leave A Comment