How to Use the Quick Selection Tool in Photoshop

How to Use the Quick Selection Tool in Photoshop

The Quick Selection tool in Photoshop has a bad reputation, but it can be a photo editor or artist’s secret weapon! That’s because Photoshop’s quick selection tools are rough around the edges. They can extract complex images in just a few clicks with a few minor regimens and tweaks.

It’s excellent for pinpointing adjustments and creating quick mockups. It can be surprisingly accurate on simple shapes and solid colors. If you’re not using the Quick Selection tool in Photoshop, you’re missing out. Let’s look at each quick selection tool, how to use it, and when might be the best time to use any of them.

The quick selection tools in Photoshop are a group of tools that automatically select pixels based on color and contrast. Each quick selection tool works best with images with well-defined edges and high-contrast colors. Three tools qualify as quick selection tools.

Quick Selection

The Quick Selection tool itself. In Photoshop 2022, you’ll find the Quick Selection tool on the Tools panel. By default, it will be the fourth option below the Polygonal Lasso Tool. The Quick Selection icon is a paintbrush with a circle of dotted lines around the tip.

The Quick Selection tool in Photoshop is ideal when you want to make a fast selection where accuracy is not as important, like creating quick mockups of images. It also works well for selectively adjusting a section of your image.

Object Selection

The Object Selection tool was introduced in Photoshop 2020. The Object Selection tool will identify objects based on well-defined, high-contrast edges. Object Select will highlight what it deems to be an object in blue as you move your mouse around an image.

The Object Selection tool also houses Select Subject in its upper Options bar. It’s best used for selecting objects that are in focus and well-defined. The Subject Select is best used on people subjects, though it can also select animals.

Magic Wand

The Magic Wand tool selects pixels based on color and tone. When you select an area using the Magic Wand tool, it will select pixels similar in tone and hue. You can control the Tolerance, which controls how different a pixel can be before being excluded from the selection.

The Magic Wand tool is ideal for selecting large areas of similar color, like skies.

Select and Mask & Refine Edge Brush

The Refine Edge brush is found in Select and Mask. You can enter Select and Mask by choosing a quick-select tool and choosing the Select and Mask button in the upper Options bar.

Select and Mask is where you can refine the edge created using any quick selection tools. You can add or remove from a selection and refine hair and smooth edges.

How to Use the Quick Selection Tool In Photoshop

Step 1: Choose the Quick Selection Brush

Select the Quick Selection tool in the left-hand side Tools bar. It will be the fourth tool in the stack. If you don’t see it, Right-click on whatever quick selection tool is active to open a list of all three quickie selection tools. The Quick Selection tool’s icon is a paint brush.

The primary setting for the Quick Selection tool is toggling Enhance Edge on or off. Enhance Edge will automatically smooth the selection.

Enhance Edge can be helpful when selecting very smooth objects like a sphere. But Enhance Edge can be less ideal when selecting sharp or complex items like hands. I like to keep it off, but you can try it both ways.

Step 2: Drag the Brush to Create a Selection

Now, drag the Quick Selection brush over the subject you want to select. You can increase and decrease the Quick Selection Brush size using the [ and ] keys.

As you drag the brush, Quick Select will select more pixels.

Step 3: Edit Your Selection

By default, you can click to add to a selection without holding down a key.

To take away from a selection, hold it and click on the portion of selection you want to be removed.

The Quick Selection tool will always try and snap to well-defined edges, so you don’t have to be overly accurate with where you click.

Step 4: Create a Layer Mask

To use your selection to extract an object, you can add a Layer Mask to the layer. You can find the Add Layer Mask button at the bottom of the Layer’s Panel.

The layer mask will automatically take the shape of the Selection.

How to Use the Object Selection Tool in Photoshop

Step 1: Choose the Select Object Tool

Select the Object Selection tool in the left-hand side Tools bar. If not visible, Right-click on whatever quick selection tool is active to open a list of all three quickie selection tools. The Object Selection tool’s icon is a square with a pointer.

First, make sure Object Finder is checked. Object Finder tells Photoshop to look at the whole image for potential objects.

Next, select your Mode, either Rectangle or Lasso. This will control how you select the area with the object. I prefer the Lasso mode, but you can try both.

Step 2: Select Your Object using Object Finder

If Object Finder is checked, Photoshop will scan the image and detect any possible objects. Hover your mouse over an object. If Photoshop sees it as an object, Object Select will highlight it in blue.

Click to create a selection automatically.

You can also toggle Show All Objects on and off using the Show All Objects icon in the upper Options toolbar. The icon is of three squares.

Step 3: Select an Object Manually

You can select the area using your mouse if you want to manually tell Photoshop where to look for an object.

Depending on the set Mode, you will have either a rectangle or a free-style lasso.

Mask a rough selection around the area with the object, and Photoshop will snap to the object’s edge.

Step 4: Remove From & Add to a Selection

If you want to select multiple objects simultaneously, hold Shift and select another object to add to the selection.

To remove an object from a selection, hold Alt and click on the object you want to remove.

Step 5: Select People Using Select Subject

If you want to select the main subject of an image, you should use Select Subject. Select Subject works particularly well on people subjects.

With any of the three quick selection tools active, find the Select Subject button in the upper Options Bar.

Choose Select Subject, and Photoshop will create a selection around what it thinks to be the image’s main subject.

How to Use the Magic Wand Tool in Photoshop

Step 1: Choose the Magic Wand Tool

Choose the Magic Wand tool in the left-hand side Tools bar. If not visible, Right-click on whatever quick selection tool is active to open a list of all three quickie selection tools. The Magic Wand tool’s icon is a magic wand surrounded by stars.

The primary setting you’ll want to adjust when using the Magic Wand tool is the Tolerance level. Tolerance tells Photoshop how much should be selected. The higher the Tolerance, the more selected.

I found a Tolerance of 25 to work well for our example image. However, you can go all the way up to 255. Every image will call for a different level of Tolerance.

Step 2: Click and Select an Area

With the Magic Wand tool active, click on an area you want to be selected. The Magic Wand tool works best with larger regions of similar color and tones.

For our example image, I want to extract the Ferris wheel, but I’ll click to select the sky, not the Ferris wheel itself.

Step 3: Add to & Remove From a Selection

After your initial click, if you click again, a new area will be selected, and your first selection will disappear.

To further add to a selection, hold down Shift and click on the area you want to add.

To remove from a selection, hold Alt and click.

5. How to Use the Select and Mask & the Refine Edge Brush in Photoshop

Step 1: Enter Select and Mask

Once you’ve created your selections and added a Layer Mask, you’ll have your extracted subject or object. However, they will likely need some refinement using Select and Mask.

Below, the model was selected and extracted using the Object Select button and a layer mask. Select Subject would have done a better job; however, this will give us a clear view of how Select and Mask works.

You can enter Select and Mask by choosing any quick-select tool and choosing the Select and Mask button in the upper Options bar.

Step 2: Refine Hair in Select and Mask

One of the most helpful tools in Select and Mask is the Refine Hair button found in the upper Option bar while in Select and Mask.

Click the button, and the hair will automatically become more refined and accurate.

Step 3: Add to and Remove from Mask

If you want to add or remove from your Layer Mask, select the Refine Edge brush found on the left-hand toolbar.

Next, Under Edge Detection, toggle On Smart Radius. Set Radius to 3-5 pixels. You can try different Radius settings. I find 4 pixels work for most things.

Now, you can drag the Refine Edge brush over the areas you want to be selected and masked.

You can remove part of a mask by holding Alt and clicking and dragging.

Step 4: Remove Fringe Edges

Finally, you can remove any leftover background color, also known as fringe edges, by going to Output Settings in the right-hand panel.

Toggle on Decontaminate Colors, setting the amount to somewhere around 50 to 100%

The amount will depend on the image and how much leftover background is visible. It’s best to try and set it to as low as you can.

Decontaminate Colors is destructive, meaning it permanently edits your photo. It should output to a new copied layer. Your original layer will be turned off but not deleted.

Conclusion

That’s the Photoshop quick selection tool in a nutshell. While using any of the quick selection tools means you’ll have to go back and do a second round of refinements, that doesn’t mean they still don’t end up saving you time. And every year that goes by, a new Photoshop update gets released and makes them even more accurate.

Learning how to use the quick selection tools in Photoshop and knowing when to use them is a must for any artist or photo editor. Luckily, it’s quick and easy to do.

The Auto Selection Tool in Photoshop Elements – Instructions

The Auto Selection Tool in Photoshop Elements: Overview

The Auto Selection tool in Photoshop Elements was introduced in Photoshop Elements 2018. It lets Photoshop Elements attempt to automatically select an image object by having you draw a selection shape around it. This tool will not often perfectly select the entire object, at first. However, it makes a terrific starting point from which you can then refine the selection it makes. It is also very easy to use.

To use the Auto Selection tool in Photoshop Elements, select the “Auto Selection” tool from the Toolbox. Also, if necessary, select it from the Tool Options Bar. It shares a button in the “Select” button group with the Quick Selection Tool, Selection Brush Tool, Magic Wand Tool, and the Refine Selection Brush Tool.

In the Tool Options Bar, then choose the type of selection to make. An improvement introduced in Photoshop Elements 2020 is the new “Select Subject” button. If you have a photograph of a subject in a layer to select, you can simply click the “Select Subject” button at the right end of the Tool Options Bar to let Photoshop Elements attempt to select the subject automatically, with no selection needed. Additionally, notice that this button is also available when you select either the Quick Selection, Selection Brush Tool, Magic Wand, or Refine Selection Brush Tools, in addition to the Auto Selection tool.

The Auto Selection Tool in Photoshop Elements – Instructions: A picture of a user attempting to automatically select a subject in an image by using the Select Subject button in Photoshop Elements.

Alternatively, to create a new selection, select the “New selection” button. To add to an existing selection, click the “Add to selection” button. To subtract from an existing selection, choose the “Subtract from selection” button. Then choose the selection tool to use to make the selection area within which Elements looks for an object to select by making a choice in the Tool Options Bar section to the right. Select either the “Rectangle,” “Ellipse,” “Lasso,” or “Polygon Lasso” choice. Use these selection shape tools as you would use the corresponding selection tool in the Toolbox.

Checking the “Sample All Layers” checkbox makes the Auto Selection tool select an object in all layers you click and drag over. If unchecked, it restricts itself to the currently selected layer. To constrain the selection to the inside of the region you click and drag over, check the “Constrain Selection” checkbox. If unchecked, the selection can extend beyond the area over which you click and drag.

After setting the tool’s options, then click and drag over the image area that contains the object to automatically select. Note that you must create this selection area using the selection methods of the shape type you chose. For example, if you chose the “Polygon Lasso” shape, then you must click at the different points around the area, back to the starting point, to make the shape selection.

The Auto Selection Tool in Photoshop Elements – Instructions: A picture of a user refining the initial selection made by the Auto Selection Tool in Photoshop Elements.

After making the shape selection, Elements then tries to select the object within the area you chose. If needed, you can then use the “Add to selection” or “Subtract from selection” buttons in the Tool Options Bar with this tool to quickly refine selection errors by clicking and dragging over them, too. This helps to quickly give you a selection area that you can then use or further refine, if needed.

The Auto Selection Tool in Photoshop Elements: Instructions

To use the Auto Selection tool in Photoshop Elements, select the “Auto Selection” tool from the Toolbox and, if necessary, the Tool Options Bar. Then select the layer in the Layers Panel that contains the object to select. Then, in the Tool Options Bar, choose the type of selection to create. To let Photoshop Elements attempt to automatically select a subject without making a selection if using Photoshop Elements 2020 and if you have a photograph of a subject in a layer to select, click the “Select Subject” button at the right end of the Tool Options Bar. Additionally, notice that this button is also available when you select either the Quick Selection, Selection Brush Tool, Magic Wand, or Refine Selection Brush Tools, too. Alternatively, to create a new selection, select the “New selection” button. To add to an existing selection, click the “Add to selection” button. To subtract from an existing selection, choose the “Subtract from selection” button. Then choose the selection tool to use to create the selection area within which Elements looks for an object. Choose either the “Rectangle,” “Ellipse,” “Lasso,” or “Polygon Lasso” choice from the Tool Options Bar section to the right. To select an object in all layers you click and drag over, check the “Sample All Layers” checkbox. To constrain the selection to the inside of the region you click and drag over, check the “Constrain Selection” checkbox. After setting the tool’s options, then click and drag over the image area that contains the object to automatically select. You must create this selection area using the selection methods of the shape type you chose. For example, if you chose the “Polygon Lasso” shape, then you would click at the different points around the area, back to the starting point, to make the shape selection. After making the shape selection, Elements then tries to select the object within the area you chose. If needed, then use the “Add to selection” or “Subtract from selection” buttons in the Tool Options Bar with this tool to quickly refine selection errors by clicking and dragging over them, too.

The Auto Selection Tool in Photoshop Elements: Video Lesson

The following video lesson, titled “The Auto Selection Tool,” shows how to use the Auto Selection Tool in Photoshop Elements. This video lesson is from our complete Photoshop Elements tutorial, titled “Mastering Photoshop Elements Made Easy v.2020.”

Photoshop Tutorial #2 — Quick Selection Tool and blur effect

Photoshop Tutorial #2 — Quick Selection Tool and blur effect

In this post, I will guide you on how to use the Quick Selection tool in Adobe Photoshop CC. This is a great tutorial dedicated to helping beginners familiarize themselves with Adobe Photoshop CC.

What is the Quick Selection tool? In Photoshop, the Quick Selection tool is used to select an area of an image and modify it.

Above is the video tutorial and below is the written form

Download link for the photo used for this tutorial

Step #1 — Make a copy of the background layer by dragging and dropping the background layer over the “create a new layer” button.

Step #2 — Select the quick selection tool by pressing the W key.

Step #3 — Press and hold the left mouse key to select the entire butterfly. ***In case you select too much, hold the Alt key while pressing the left mouse key to deselect.

Step #4 — Copy and paste the selection with Ctrl + C and Ctrl + P.

Step #5 — Select the Background copy layer and go to the Filter window → select Radial Blur.

Last Step — Type 40 in Amount and click Zoom in the Blur Method. Press OK.

Want to learn about how to use Adobe Photoshop? Check out the YouTube link here. This is a great channel dedicated to helping beginners familiarize themselves with Adobe Photoshop CC.

Check me out on these platforms

Twitter:

Instagram:

YouTube: Productive Grind Academy